KYOSHI.VN

0933.29 18 28

Giao hàng toàn quốc

Hotline:

093.329.1828

Chia sẻ:

Mảnh khoan Micro Spot Drill 90° X060A90-- Nine9

Giá ưu đãi:

Giá niêm yết:

– How to get better accurate hole position when micro drilling on round bar stock?
– Using X060 micro spot drills can improve hole location and tool life of a deep hole drill or micro drill.

CATALOGUE

Mô tả

Nine9 X060 micro spot drill geometries are short to optimize rigidity and accuracy with a point angle to guide micro drill towards the hole’s center line. It produces a consistent surface for micro drill successfully to enter the workpiece especially for round, angled or curved surfaces.

X060 micro spot drill has different coatings, not only can spotting on non-ferrous metal but also spotting for all kinds of steel, cast iron and hardened steel up to 56 HRC

Insert 90° / 120° / 142°

Nine9 X060 Mirco spot carbide insert
• NC2032: For all kinds of steel from < 40 HRC, carbon steel, alloy steel,and cast iron
• NC2035: ALDURA coating, reduces heat and tool wear. For steel with heat treatment up to 56 HRC.
• XP9001: Mirror polished, for non-ferrous metal, aluminum, brass, copper, plastic, acrylic.
Angle Part No Grade Coating Dmin. Dmax. Tmax. Re Workpiece material
90° X060A90W010R NC2032 TiAlN 0.1mm
(0.004″)
1.1mm
(0.043″)
0.5mm
(0.020″)
0.02
(0.0008″)
P; M; K
90° X060A90W010R NC2035 ALDURA 0.1mm
(0.004″)
1.1mm
(0.043″)
0.5mm
(0.020″)
0.02
(0.0008″)
P; K; H
90° X060A90W010R XP9001 Polished 0.1mm
(0.004″)
1.1mm
(0.043″)
0.5mm
(0.020″)
0.02
(0.0008″)
N
90° X060A90W020R NC2032 TiAlN 0.2mm
(0.008″)
2.2mm
(0.087″)
1.0mm
(0.040″)
0.04
(0.002″)
P; M; K
90° X060A90W020R NC2035 ALDURA 0.2mm
(0.008″)
2.2mm
(0.087″)
1.0mm
(0.040″)
0.04
(0.002″)
P; K; H
90° X060A90W020R XP9001 Polished 0.2mm
(0.008″)
2.2mm
(0.087″)
1.0mm
(0.040″)
0.04
(0.002″)
N
Cylindrical Shank
  • Various inserts can fit on the same tool holder.
  • Also using for deburring tool and 30°, 45°, 60° X060 engraving tools.

Nine9 X060 micro spot drill

Part No Insert Size Ød L Shank Screw Key
00-99619-X060-06 X060 series 6mm (0.236”) 40mm (1.575″) Steel NS-22044 0.9Nm NK-T7
00-9619-X060-06L X060 series 6mm (0.236”) 60mm (2.362”) Carbide
00-9619-X060-06LS X060 series 6mm (0.236”) 60mm (2.362″) Steel
00-99619-X060-06XL X060 series 6mm (0.236”) 100mm (3.940″) Carbide
00-99619-X060-08 X060 series 8mm (0.315”) 60mm (2.362″) Steel

Integrated ER16 taper-shank

• An integrated ER taper-shank cutter, eliminate assembly tolerance. Optimize the rigidity.  Increase tool life.  Better surface finish quality.
• The cutter has minimal assemble parts, changing tool takes just few seconds.
• Perfectly suitable for driven tools and spindles with ER interface of CNC turning centers and swiss type automatic lathes.ERgo ER16 collet & Micro spot drill
Part No Insert Size L
99816-X060 X060 series 22mm ( 0.866″)

Đánh giá

Chưa có đánh giá nào.

Chỉ những khách hàng đã đăng nhập và mua sản phẩm này mới có thể đưa ra đánh giá.